Adobe Stock #1772796571Commercial Kitchen Exhaust Installation and Maintenance in Metro Vancouver
TCS Commercial Exhaust Cleaning Inc. installs, repairs, and maintains every component of your commercial kitchen exhaust system, from welded grease ductwork to fire-rated access panels, so one provider handles it all.
- Emergency servicesAvailable 24/7
- Office hoursMonday – Friday 7 to 5
One Provider for Your Entire Exhaust System Lifecycle
Most facility managers schedule regular hood cleaning but overlook the auxiliary services that keep the rest of the exhaust system accessible, compliant, and functional. Missing access panels mean technicians cannot reach critical duct sections during inspections. Worn-out baffle filters reduce airflow and allow grease to migrate deeper into ductwork. Untested weld joints in new installations can leak grease vapours into ceiling cavities. Each gap creates a separate inspection deficiency and a separate vendor call.
Total Commercial Exhaust eliminates that fragmentation. We install complete exhaust systems for new builds and renovations, add fire-rated access panels to existing ductwork, run scheduled baffle filter exchanges, and perform duct water leak testing on new installations. Every service is documented with digital photo reporting and NFPA 96 compliance records, giving you a single maintenance file and a single point of contact for your entire exhaust infrastructure.
TC Solutions site · Adobe Stock #196499302Commercial Kitchen Exhaust Installation, Repairs and Maintenance Services
Complete Commercial Kitchen Exhaust System Installation
We install full commercial kitchen exhaust systems for new construction, renovations, and kitchen upgrades throughout Vancouver, Burnaby, New Westminster, Richmond, North Vancouver, Coquitlam, and Surrey. Installation scope includes commercial exhaust hood canopies, welded grease ductwork, listed fire-rated duct access doors, rooftop and inline exhaust fans, exhaust fan hinge kits and safety cables or chains, stainless-steel baffle filters, and replacement vents and exhaust components. Every installation follows NFPA 96 standards, so your system is inspection-ready from day one.
Commercial Kitchen Exhaust Duct Water Leak Testing
Welded grease ductwork can harbour invisible joint deficiencies that only reveal themselves after the system is operational. Our water leak testing service identifies possible leaks or deficiencies in newly installed welded duct joints before the exhaust system is put into service. Testing results are documented with photographs and a written report identifying areas that may require corrective work. This service helps contractors, installers, and property owners verify installation quality and avoid costly post-commissioning repairs.
Fire-Rated Duct Access Panel Installation
NFPA 96 requires grease-tight access panels at specific intervals along horizontal and vertical ductwork. We install UL- or ULC-listed, grease-tight access panels where required to provide proper access for exhaust duct cleaning, inspection, and maintenance. Additional panels can be added to existing ductwork when sections of the system cannot be properly reached or cleaned. Accessible ductwork means thorough cleaning and fewer inspection deficiencies.
Exhaust Fan Hinge Kits and Safety Cables
Rooftop exhaust fans need to be opened safely for cleaning and inspection. We supply and install exhaust fan hinge kits and safety cables or chains that allow fans to be tilted up without straining electrical wiring, roof curbs, or surrounding equipment. Proper hinge kits protect your rooftop assets and reduce the risk of damage during routine maintenance visits.
Commercial Baffle Filter Exchange Program
Grease-saturated baffle filters restrict airflow and allow grease to penetrate deeper into the exhaust system. Our filter exchange program provides professionally cleaned commercial stainless-steel grease filters on a scheduled basis. Dirty filters are swapped for clean replacements, helping maintain airflow, improve grease filtration, and reduce grease buildup inside the ductwork. A scheduled exchange gives your kitchen a convenient, hands-off approach to filter maintenance.
How We Deliver Auxiliary Exhaust Services
Every installation, repair, or maintenance visit follows a structured process designed to keep your kitchen running while we work.
- 01
Site Assessment
We evaluate your exhaust system layout, identify missing access panels, assess filter condition, and document any duct sections that cannot be properly reached for cleaning or inspection.
- 02
Scope and Scheduling
A detailed work plan is prepared based on the assessment. Service is scheduled during your preferred window, with overnight and split-shift options available to prevent disruption to kitchen operations.
- 03
Installation or Service Execution
Our crew completes the work according to NFPA 96 requirements, whether that involves installing welded ductwork, adding fire-rated access panels, exchanging baffle filters, or performing duct water leak testing.
- 04
Documentation and Reporting
Every completed service is documented with digital before-and-after photographs and compliance records. You receive a comprehensive report suitable for fire marshals, property insurers, and facility maintenance files.
Is This Service Right for Your Facility
Auxiliary exhaust services fill the gaps that regular hood cleaning cannot address. Here is how to determine whether your facility needs them.
Duct accessibility
If technicians cannot reach all duct sections during cleaning, you likely need additional fire-rated access panels installed.
New construction or renovation
Any newly installed welded grease ductwork should be water-leak tested before the system goes into service.
Filter maintenance burden
Kitchens that struggle to keep baffle filters clean on schedule benefit from a managed exchange program.
Rooftop fan condition
Fans without hinge kits risk wiring damage and roof curb deterioration during every maintenance visit.
A good fit when
- Your facility has recently changed ownership and the exhaust system has inaccessible duct sections with no access panels.
- You are building or renovating a commercial kitchen and need a full exhaust system installed to NFPA 96 standards.
- Your kitchen operates at high volume and needs a scheduled filter exchange to maintain airflow without managing filter cleaning in-house.
Probably not needed when
- Your exhaust system already has adequate access panels and your only need is routine NFPA 96 cleaning. In that case, our Regular NFPA 96 Exhaust Cleaning service is the right fit.
- Your system requires a full bare-metal restoration due to years of deferred maintenance. Our Exhaust System Restoration / Code Compliance Cleaning service addresses that need.
If your facility needs any combination of installation, access panel work, filter exchange, or leak testing, Total Commercial Exhaust can handle every component under one service agreement, reducing vendor coordination and keeping your compliance documentation in a single file.
Safety and maintenance work, before and after
Source: TC Solutions site
Source: TC Solutions site
Source: TC Solutions siteIndustries We Serve
Total Commercial Exhaust works wherever there is a commercial kitchen, from restaurants and food trucks to hospitals, arenas and processing plants.
Source: TC Solutions siteRestaurants & Fine Dining
Source: TC Solutions siteFood Courts & Food Trucks
Source: TC Solutions siteBars, Pubs & Breweries
Source: TC Solutions siteHotels & Convention Centres- Stock slot · Sports & Entertainment ArenasSports & Entertainment Arenas
- Stock slot · Golf & Sports ClubsGolf & Sports Clubs
- Stock slot · Community & Civic FacilitiesCommunity & Civic Facilities
- Stock slot · Religious Institutions & ChurchesReligious Institutions & Churches
Source: TC Solutions siteHospitals, Healthcare & Senior Living
Source: TC Solutions siteSchools & Educational Facilities
Source: TC Solutions siteProperty Management & Commercial Facilities
Source: TC Solutions siteProcessing Plants- Stock slot · TrainsTrains
- Stock slot · Correctional FacilitiesCorrectional Facilities
Source: TC Solutions siteCasinos
Frequently Asked Questions
Do you install complete commercial kitchen exhaust systems?
Yes. Total Commercial Exhaust installs commercial kitchen exhaust systems for new construction, renovations, and kitchen upgrades throughout Vancouver and the Lower Mainland. Depending on the project, installation may include exhaust hood canopies, welded grease ductwork, fire-rated duct access doors, rooftop or inline exhaust fans, fan hinge kits, safety cables, stainless-steel baffle filters, and replacement exhaust components.
Why are fire-rated access panels important in commercial kitchen exhaust ductwork?
Access panels allow technicians to reach sections of grease ductwork for cleaning, inspection, and ongoing maintenance. Total Commercial Exhaust installs UL- or ULC-listed, grease-tight access panels where required and can add panels to existing ductwork when parts of the system cannot be properly accessed or cleaned.
What is commercial kitchen exhaust duct water leak testing?
Water leak testing helps identify possible leaks or deficiencies in newly installed welded grease ductwork before the exhaust system is put into service. Total Commercial Exhaust can document the results with photographs and a written report identifying areas that may require corrective work. This service can assist contractors, installers, and property owners with installation verification.
How do exhaust fan hinge kits and safety cables support safer maintenance?
Hinge kits allow rooftop exhaust fans to be opened more safely for cleaning and inspection. They help reduce unnecessary strain on electrical wiring, roof curbs, and nearby components during servicing. Safety cables or chains provide added support while the fan is open.
What are the benefits of a commercial baffle filter exchange program?
A scheduled filter exchange program replaces dirty, grease-loaded baffle filters with professionally cleaned stainless-steel filters. Keeping filters clean helps maintain airflow and grease filtration while reducing the amount of grease entering the exhaust system. It also gives commercial kitchens a convenient way to manage filter maintenance on an ongoing schedule.
Get a Site Assessment for Your Exhaust System
Whether you need a complete exhaust system installation, additional access panels, duct water leak testing, or a scheduled filter exchange program, Total Commercial Exhaust can scope the work and provide a detailed quote. Call us at 604-229-1597 or submit a request online.
Office hours: Monday through Friday, 7 a.m. to 5 p.m. Emergency services available 24/7.